Show Vrrp Track - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show vrrp track

show vrrp track
Displays information about tracking policies on the switch.
show vrrp track [track_id]
Syntax Definitions
track_id
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Enter the tracking ID to display information about a particular policy; if no tracking policy ID is entered,
information for all tracking policies is displayed.
Examples
-> show vrrp track
Track
ID Policy
-----+-----------------+----------+------+-----
1 PORT 1/1
2 192.10.150.42
output definitions
Track ID
Policy
Admin State
Oper State
Pri
Release History
Release 7.1.1; command was introduced.
page 16-42
The ID of the tracking policy for which you want to display information.
Admin Oper
State State Pri
Enabled Up 25
Enabled Down 25
The ID of the tracking policy.
The slot/port, IP address, or VLAN tracked by the policy.
Whether the tracking policy is administratively enabled or disabled.
Indicates whether the operating state of the tracking policy is Up or
Down.
The value to be decremented from the priority value of the virtual
router monitoring this tracking policy when the operational state of the
tracking policy is down.
OmniSwitch CLI Reference Guide
VRRP Commands
March 2011