OSPF Commands
ip ospf interface cost
Configures the OSPF interface cost.
ip ospf interface {interface_name} cost cost
Syntax Definitions
interface_name
cost
Defaults
parameter
cost
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The configured interface cost, if any, is used during OSPF route calculations.
Examples
-> ip ospf interface vlan-101 cost 10
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip ospf interface
MIB Objects
ospfIfMetricTable
ospfIfMetricIpAddress
ospfIfMetricValue
OmniSwitch CLI Reference Guide
The name of the interface.
The interface cost. The valid range is 0 to 65535.
default
1
Displays the status and statistics of an OSPF interface.
March 2011
ip ospf interface cost
page 17-41