Ip Ospf Restart-Helper Admin-State - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip ospf restart-helper admin-state

ip ospf restart-helper admin-state
Administratively enables and disables the capability of an OSPF router to operate in helper mode in
response to a router performing a graceful restart.
ip ospf restart-helper [admin-state {enable | disable}]
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The minimum hardware configuration for this command is a redundant CMM configuration. This
command is not supported on OmniSwitch 10K switches with a single CMM.
Examples
-> ip ospf restart-helper admin-state disable
-> ip ospf restart-helper admin-state enable
Release History
Release 7.1.1; command was introduced.
Related Commands
ip ospf restart-support
ip ospf restart-helper strict-lsa-
checking admin-state
show ip ospf restart
MIB Objects
alaProtocolOspf
alaOspfRestartHelperSupport
page 17-48
Enables the capability of an OSPF router to operate in helper mode.
Disables the capability of an OSPF router to operate in helper mode.
default
enable
Administratively enables and disables support for the graceful
restart feature on an OSPF router.
Administratively enables and disables whether or not a changed
Link State Advertisement (LSA) will result in termination of grace-
ful restart by a helping router.
Displays the OSPF graceful restart related configuration and status.
OmniSwitch CLI Reference Guide
OSPF Commands
March 2011