OSPF Commands
ip ospf admin-state
Enables or disables the administration status of OSPF on the router.
ip ospf admin-state {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The OSPF protocol must be enabled for it to route traffic.
Examples
-> ip ospf admin-state enable
-> ip ospf admin-state disable
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip ospf
MIB Objects
ospfGeneralGroup
ospfAdminStat
OmniSwitch CLI Reference Guide
Enables OSPF.
Disables OSPF.
default
disable
Displays OSPF status and general configuration parameters.
March 2011
ip ospf admin-state
page 17-3