Ip Ospf Interface Auth-Key - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip ospf interface auth-key

ip ospf interface auth-key
Configures an OSPF authentication key for simple authentication on an interface.
ip ospf interface {interface_name} auth-key key_string
Syntax Definitions
interface_name
key_string
Defaults
The default for the authentication key string is a null string.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Sets a password as a simple text string of 8 ASCII characters.
•
Must be used in conjunction with the auth-type command, described on
Examples
-> ip ospf interface vlan-101 auth-key pass
Release History
Release 7.1.1; command was introduced.
Related Commands
ip ospf interface auth-type
show ip ospf interface
MIB Objects
ospfIfTable
ospfIfAuthKey
page 17-30
The name of the interface.
An authentication key (8 characters maximum).
Sets the authentication type.
Displays the status and statistics of an OSPF interface.
page 17-31, set to simple.
OmniSwitch CLI Reference Guide
OSPF Commands
March 2011