Ip Ospf Mtu-Checking - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip ospf mtu-checking

ip ospf mtu-checking
Enables or disables the use of Maximum Transfer Unit (MTU) checking. The MTU limits the size of a
transmitted or received packet.
ip ospf mtu-checking
no ip ospf mtu-checking
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The no form of this command disables MTU checking.
•
This command is used to disable the checking for mismatch of the interface MTU while establishing a
neighbor adjacency with a router. MTU mismatch occurs when a router receives packets that contain a
larger MTU value than that of the interface on which adjacency is being established. The interface
MTU is the largest IP datagram size (in bytes) that the interface can accept.
Examples
-> ip ospf mtu-checking
-> no ip ospf mtu-checking
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip ospf
MIB Objects
alaProtocolOspf
alaOspfMTUCheck
page 17-10
Displays the OSPF status and general configuration parameters.
OmniSwitch CLI Reference Guide
OSPF Commands
March 2011