Show Vrrp - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show vrrp

show vrrp
Displays the virtual router configuration for all virtual routers or for a specific virtual router.
show vrrp [vrid]
Syntax Definitions
vrid
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the show vrrp command to display information about configuration parameters, which may be set
through the vrrp command. Use the show vrrp statistics command to get information about VRRP pack-
ets.
Examples
The following is an example of the output display on an OmniSwitch 10K:
-> show vrrp
VRRP trap generation: Enabled
VRRP startup delay: 75
IP
VRID VLAN Address(es)
----+ ----+ -------------+----------+----------+----------+---------
1 1 192.168.170.1
192.168.170.2
2 15 10.2.25.254
The following is an example of the output display on an OmniSwitch 10K:
-> show vrrp
VRRP default advertisement interval: 5 seconds
VRRP default priority: 100
VRRP default preempt: Yes
VRRP trap generation: Enabled
VRRP startup delay: 45
IP
VRID VLAN Address(es)
----+----+---------------+--------+--------+------+--------
1 101 192.60.245.240
2 102 192.60.246.240
page 16-36
The virtual router ID, in the range from 1–255.
Admin
Status Priority
Enabled 255
Disabled 100
(expired)
Admin
Status Priority Preempt Interval
Enabled 100 Yes
Enabled 100 Yes
Adv.
Preempt Interval
Yes 1
No 1
Adv.
5
5
OmniSwitch CLI Reference Guide
VRRP Commands
March 2011