OSPF Commands
ip ospf interface transit-delay
Configures the OSPF interface transit delay.
ip ospf interface {interface_name} transit-delay seconds
Syntax Definitions
interface_name
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The estimated number of seconds required to transmit a link state update over this interface. This
command takes into account transmission and propagation delays and must be greater than 0.
Examples
-> ip ospf interface vlan-101 transit-delay 100
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip ospf interface
MIB Objects
ospfIfTable
ospfIfTransitDelay
OmniSwitch CLI Reference Guide
The name of the interface.
The transit delay, in seconds. The valid range is 0–3600.
default
1
Displays the status and statistics of an OSPF interface.
March 2011
ip ospf interface transit-delay
page 17-45