OSPF Commands
ip ospf route-tag
Configures a tag value for the Autonomous System External (ASE) routes created.
ip ospf route-tag tag
Syntax Definitions
tag
Defaults
parameter
tag
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command allows you to set a tag value for ASE routes that are learned by this OSPF router. The
tag value allows for quick identification.
•
OSPF ASE route advertisements contain a tag value field. This field allows the exchange of informa-
tion between autonomous system border routers (ASBRs).
Example
-> ip ospf route-tag 2
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip ospf
MIB Objects
alaProtocolOspf
alaOspfRedistRouteTag
OmniSwitch CLI Reference Guide
The set tag value. The valid range is 0–2,147,483,647.
default
0
Displays OSPF status and general configuration parameters.
March 2011
ip ospf route-tag
page 17-13