Ip Ospf Interface Md5 Key - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

OSPF Commands

ip ospf interface md5 key

Configures the OSPF key string. This interface MD5 string, along with the key identification number,
enables the interface to encode MD5 encryption.
ip ospf interface {interface_name} md5 key_id key key_string
Syntax Definitions
interface_name
key_id
key_string
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command is used in conjunction with the commands described above on
17-35.
•
For MD5 authentication to function properly the same key string must be configured on the neighbor-
ing router for that interface.
Examples
-> ip ospf interface vlan-101 md5 100 key 1
Release History
Release 7.1.1; command was introduced.
Related Commands
ip ospf interface auth-type
ip ospf interface md5
show ip ospf interface
OmniSwitch CLI Reference Guide
The name of the interface.
The key ID. The valid range is 1–255.
A key string.
Sets the OSPF interface authentication type.
Creates and deletes the OSPF interface MD5 key identification
number.
Displays the status and statistics of an OSPF interface.
March 2011
ip ospf interface md5 key
page 17-31 and page
page 17-37