ip ospf interface hello-interval
ip ospf interface hello-interval
Configures the OSPF interface hello interval.
ip ospf interface {interface_name} hello-interval seconds
Syntax Definitions
interface_name
seconds
Defaults
parameter
seconds
(broadcast and point-to-point)
seconds
(NBMA and point-to-multi-
point)
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This is the interval between two consecutive hello packets sent out on this interface.
Examples
-> ip ospf interface vlan-101 hello-interval 50
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip ospf interface
MIB Objects
ospfIfTable
ospfIfHelloInterval
page 17-34
The name of the interface.
The hello interval, in seconds. The valid range is 1–65535.
default
10
30
Displays the status and statistics of an OSPF interface.
OmniSwitch CLI Reference Guide
OSPF Commands
March 2011