Enabling And Configuring Srs (Regional Server Only) - Juniper NETWORK AND SECURITY MANAGER NSMXPRESS - QUICK START REV1 Quick Start Manual

NSMXpress Quick Start
16
Use the Remote Replication Timeout option to set up a timeout for Rsync. The valid
5.
range (in seconds) is 1-65535. The default is 1800 seconds.
Click Submit to save the options and return to the main menu or continue with the
6.
other advanced installation options.

Enabling and Configuring SRS (Regional Server Only)

This option is not available on a central manager. To configure statistical report server
(SRS) settings:
On the Advanced Options menu, click Menu next to SRS (see Figure 4 on page 12) to
1.
open the SRS menu (see Figure 12 on page 16).
Figure 12: SRS Menu
Use the options to turn SRS on (y) or off (n). The default is off. If you turn on this
2. SRS
feature, the server is used with the GUI server.
Use the SRS DB IP option to enter the IP address for the server on which you have
3.
installed the SRS database server.
Use the option to select the database type. The values are pgsql (the
SRS DB Type
4.
default), oracle, or mssql.
Use the SRS Database Name
5.
default value is netscreen. To enter another name, click the radio button next to the
blank text box and enter the name in the text box.
Use the
SRS DB Owner Name
6.
The default value is netscreen. To enter another name, click the radio button next to
the blank text box and enter the name in the text box.
option to enter the name of the SRS database. The
option to enter the owner's name of the SRS database.
Copyright © 2010, Juniper Networks, Inc.