Backup-Pe-Group - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

backup-pe-group

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1736
®
OS for EX Series Ethernet Switches, Release 10.3
backup-pe-group group-name {
backups [ addresses ];
local-address address;
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options multicast],
[edit logical-systems logical-system-name routing-options multicast],
[edit routing-instances routing-instance-name routing-options multicast],
[edit routing-options multicast]
Statement introduced in Junos OS Release 9.0.
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Configure a backup provider edge (PE) group for ingress PE redundancy when
point-to-multipoint label-switched paths (LSPs) are used for multicast distribution.
group-name —Name of the group for PE backups.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ingress PE Redundancy
Copyright © 2010, Juniper Networks, Inc.