INVT Goodrive350-19 Series Operation Manual page 501

Goodrive350-19 Series VFD for Crane
Level 1
System settings
D.3.2.2 Editing a parameter list
The parameters in the parameter list in stopped state can be added as needed (through the menu of
user defined home parameters), and the list can also be edited such as "Move up", "Move down",
"Delete from the list", and "Restore default". The edit function is shown in the following.
16:02:35
Fwd Local Ready
Stopped-state parameters
Running-state parameters
Back Home
Press the key to enter the edit interface, select the operation needed, and press the
Level 2
MemArea3: BACKUP03
Restore default (excl. motor
param)
Restore to default values
(test mode)
Restore to default (incl.
motor param)
/ /
16:02:35
GD350-19
P17.00：Set Freq
P17.11：DC Bus Volt
P17.12：HDIB/A/S4/3/2/1
P17.13：RO2/RO1/HDO/Y1
P17.26：Current Oper Time
P17.15：Motor Trq Ref
Sele Back
Figure D-10 Editing list 1
Level 3
Fwd Local Ready GD350-19
Edit OK
-489-
Optional peripheral accessories
Level 4
Upload param from local to
keypad
Download all param from
keypad
Download non motor
param from keypad
Download motor param
from keypad
Check Restore default
(excl. motor param)
Sure to restore to default
values? (test mode)
Sure to restore to default
(incl. motor param)
Language
Time/date
Backlight brightness
regulation
Backlight time adjustment
Power-on guiding enable
Power-on guiding settings
Keyboard burning selection
Fault time enable
Control board burning
selection
Up/Down key sensitivity
16:02:35
Fwd Local Ready
Place top
Move up
Move down
Delete from the list
Restore default
Back Home
GD350-19
Sele
key,