INVT Goodrive350-19 Series Operation Manual page 163

Goodrive350-19 Series VFD for Crane
Function
Name
code
P00.16 AVR function
Function parameter
P00.18
restoration
Group P01—Start and stop control
Function
Name
code
Running mode of
P01.00
start
Description
load.
3: Static autotuning 2 (partial autotuning); when
the present motor is motor 1, only P02.06,
P02.07, and P02.08 are autotuned; when the
present motor is motor 2, only P12.06, P12.07,
and P12.08 are autotuned.
4: Dynamic autotuning 2 (valid only for AMs)
5: Partial parameter static autotuning 2 (valid
only for AMs)
0: Invalid
1: Valid during the whole process
The auto-adjusting function of the VFD can
eliminate the impact on the output voltage of
the VFD because of the bus voltage fluctuation.
Setting range of P00.18: 0–6
0: No operation
1: Restore to default values (excluding motor
parameters)
2: Clear fault records
3: Lock keypad parameters
4: Reserved
5: Restore to default values (factory test mode)
6: Restore to default values (including motor
parameters)
Note: After the
performed, the
automatically restored to 0. Restoring the
default values may
password. Exercise caution when using this
function.
Description
0: Direct start
1: Start after DC braking
2: Start after speed tracking
Note: It can be modified only when P11.26 is
-151-
selected operation
function code
delete the
Function parameters
Default Modify
○
1
◎
0
is
is
user
Default Modify
◎
0