INVT Goodrive350-19 Series Operation Manual page 291

Goodrive350-19 Series VFD for Crane
Function
Name
code
Speed
P24.15 measurement
mode
Frequency division
P24.16
coefficient
Pulse filter handling
P24.17
selection
Encoder pulse filter
P24.18
width
Description
0: By PG card
1: Locally measured through HDIA and HDIB.
Only the 24V incremental encoders are
supported.
Note: HDI height measuring is implemented
through the HDIA and HDIB and supports
only incremental 24V encoders.
0–255
When the function parameter is set to 0 or 1,
frequency division of 1:1 is implemented.
0x0000–0xFFFF
Bit 0: Enable encoder input filter
0: Do not filter
1: Filter
Bit 1: Encoder signal filter mode
0: Self-adaptive filter
1: Use P24.18 as the filter parameter
Bit2: Enable/disable encoder frequency-division
output filter
0: Do not filter
1: Filter
Bit3: Enable/disable
frequency-division output filter
0: Do not filter
1: Filter
Bit4: Enable/disable pulse reference filter
0: Do not filter
1: Filter
Bit5: Pulse reference filter mode
0: Self-adaptive filter
1: Use P24.19 as the filter parameter
Bit 6: Frequency-divided
selection (valid only for incremental encoders)
0: Encoder signals
1: Pulse reference signals
Bit 7–Bit 15: Reserved
0–63
The filter time is P24.18×0.25μs. The value 0
-279-
Function parameters
pulse reference
output source
Default Modify
◎
0
○
0
○
0x0033
○
2