INVT Goodrive350-19 Series Operation Manual page 493

Goodrive350-19 Series VFD for Crane
No. Name
Display
(12)
3
area
(13)
(14)
4 Other
(15)
The LCD has different display areas, which displays different contents under different interfaces. The
following figure is the main interface of stop state.
Area
Header
Real-time display area
A
Header VFD running state
B display area
LCD
Display screen
screen
RJ45
RJ45 interface RJ45 interface is used to connect to the VFD.
interface
Battery Clock battery
cover cover
USB Mini USB
terminal terminal
A
16:02:35
Fwd
Set Freq
P17.00 Hz
DC Bus Volt
D
P17.11 V
HDIB/A/S4/3/2/1
P17.12
Parameter
Figure D-2 LCD main interface
Name
Display the real-time; clock battery is not included; the time
needs to be reset when powering on the VFD
 Display the motor rotation direction: "Fwd" – Run forward
during operation; Rev – Run reversely during operation;
Description
item, changing digits.
Left: The Left key function varies with
interfaces, such as switch over the monitoring
interface, such as shifting the cursor leftward,
exiting current menu and returning to
previous menu.
Right: The Right key function varies with
interfaces, such as switching the monitoring
interface, shifting the cursor rightward, and
entering the next-level menu.
240×160 dot-matrix LCD; display three
monitoring parameters or six sub-menu items
simultaneously.
Remove this cover when replacing or
installing clock battery, and close the cover
after battery is installed.
Mini USB terminal is used to connect to the
USB flash drive through an adapter.
B C
Local Ready GD350-19
50.00
540.0
000000
About
Menu
F
Used to
-481-
Optional peripheral accessories
E