INVT Goodrive350-19 Series Operation Manual page 114

Goodrive350-19 Series VFD for Crane
Function
code
Enabling HDO based eddy
P91.37 current control for tower
P91.38
Duty ratio corresponding
P91.39
P91.40
Duty ratio corresponding
P91.41
P91.42
Duty ratio corresponding
P91.43
P91.44
Duty ratio corresponding
P91.45
P91.46
Duty ratio corresponding
P91.47
P91.48 HDO carrier frequency
HDO closing delay during
P91.49
Name
crane slewing
Frequency f0
to frequency f0
Frequency f1
to frequency f1
Frequency f2
to frequency f2
Frequency f3
to frequency f3
Frequency f4
to frequency f4
stop
Setting
1: HDO is used as PWM signal for
voltage adjustment output.
P91.38 setting range: P91.40–P00.03
(Max. output frequency)
Setting range
P91.42–P91.38
Setting range
P91.44–P91.40
Setting range
P91.46–P91.42
Setting range
0.00Hz–P91.44
P91.39, P91.41, P91.43, P91.47 setting
range: 0.0%–100.0%
Segmented adjustment is performed
based on the cycle ratio and frequency.
Duty ratio
100%-P91.47
100%-P91.45
100%-P91.43
100%-P91.41
100%-P91.39
P91.46 P91.44 P91.42
0.5–10.0kHz
0–100.0s
-102-
Commissioning guidelines
50.00Hz
100.0%
of P91.40:
40.00Hz
of P91.42:
95.0%
of P91.44:
10.00Hz
90.0%
of P91.46:
3.50Hz
84.5%
0.00Hz
Frequency
P91.40 P91.38
1.0kHz
Value
1
0.0%
5.0s