Siemens SINUMERIK 840D sl Commissioning Manual page 197

SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
<!-- **** OEM tool parameter 1 headline *** -->
<!-- **** Weight *** -->
<message>
<!-- **** Text identifier *** -->
<source>TM_HL_TOOL_USER_1</source>
<!-- **** Text that is output *** -->
<translation>%nweight</translation>
<!-- **** Comment only for the translator *** -->
<remark>priority tool</remark>
<!-- **** Maximum line length in characters *** -->
<!-- **** only for the translator *** -->
<chars>7</chars>
<!-- **** Number of possible lines *** -->
<!-- **** only for the translator *** -->
<lines>2</lines>
</message>
<!-- **** OEM tool parameter 1 tooltip *** -->
<!-- **** Weight *** -->
<message>
<source>TM_TT_TOOL_USER_1</source>
<translation>weight of the tool</translation>
<chars>35</chars>
<lines>2</lines>
</message>
<!-- **** Headline for own parameter *** -->
<!-- **** Priority tool *** -->
<message>
<source>TMO_HL_PRIOR_TOOL</source>
<translation>V</translation>
<remark>priority tool</remark>
<chars>1</chars>
<lines>2</lines>
</message>
<!-- **** Tooltip for own parameter *** -->
<!-- **** Priority tool *** -->
<message>
<source>TMO_TT_PRIOR_TOOL</source>
<translation>priority tool, %nuse tool preferably< /translation>
<chars>35</chars>
<lines>3</lines>
</message>
<!-- **** OEM cutting edge parameter 1 headline *** -->
<!-- **** Maximum tool width *** -->
<message>
<source>TM_HL_EDGE_USER_1</source>
<translation>maximum%nwidth</translation>
<chars>8</chars>
Tool management
12.4 Examples
191