Siemens SINUMERIK 840D sl Commissioning Manual page 498

Configuring cycles
22.6 Swiveling
MD28082 $MC_MM_SYSTEM_FRAME_MASK
= 3DH
Bit 2 = 1
Bit 3 = 1
Bit 4 = 1
Bit 5 = 1
Note
Changing machine data MD18088 and MD28082 causes the buffered memory to be
reorganized.
After changing the machine data, a series start-up file must be generated and downloaded,
otherwise, it can be assumed that data will be lost.
To change machine data, you require the following authorization: Access level 1
(manufacturer).
References
Current information:
● "siemensd.txt" file in the supplied software (standard cycles) or
● Description of Functions Basic Functions; Tool Offset (W1): Inclined surface machining
with 3 + 2 axes
● Programming Manual, measuring cycles: CYCLE996
Activating the swivel function
The swivel function is enabled on the user interface via the following channel-machine data:
MD52212 $MCS_FUNCTION_MASK_TECH
Bit 0 = 1
Configuring input screens
You can configure the input screen for swiveling using the following channel-specific cycle
setting data. The setting data is effective for all of the declared swivel data sets.
SD55221 $SCS_FUNKTION_MASK_SWIVEL_SET
Bit 0
492
TCARR and PAROT
TAROT and TOFRAME
Workpiece reference points
System frame for cycles
Enable swivel
Input field "No swiveling"
= 0 Hide
= 1 Display
System frames (SRAM)
Cross-technology function mask
Function screen, swiveling CYCLE800
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)