Siemens SINUMERIK 840D sl Commissioning Manual page 783

ShopTurn start softkeys:
Drilling Turning
HSK2 HSK3
VSK1 Drilling Stock
centered removal
VSK2 Centering Groove
VSK3 Drilling Undercut Stock
reaming
VSK4 Deep-hole Thread
drilling
VSK5 Thread Parting
VSK6 OEM --
VSK7 Positions OEM
VSK8 Repeat --
position.
See also
Defining start softkeys (Page 22)
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
Contour turning Milling
HSK4 HSK5
New contour -- Face
milling
Stock -- Pocket
removal
-- Multi-edge
removal spigot
residual
material
Grooving -- Groove
Grooving -- Thread
residual milling
material
Plunge- -- Engraving
turning
Plunge OEM OEM
turning
residual
material
>> << Contour
milling
Miscellaneous
HSK6
New Settings
contour
Path Swivel
plane
Predrilling Swivel tool
Pocket Counterspi
ndle
Pocket Transforma
res. mat. tions
Spigot Subprogra
m
Spigot res. --
mat.
<< >>
Reference lists
A.1 Lists of start softkeys
HSK10
High Tool
speed
settings
Parallel Straight line
axes
Repeat Circle center
progr. point
-- Circle radius
-- Polar
-- Approach/retr
act
OEM --
<< --
165