Siemens SINUMERIK 840D sl Commissioning Manual page 594

SINUMERIK Operate on PC/PCU
24.1 Link OEMFrame application
Creating the "slamconfig.ini" configuration file
Copy the "slamconfig.ini" and place the file in the same directory in which the
"systemconfiguration.ini" file is located:
<Installation path>/user/sinumerik/hmi/cfg
<Installation path>/oem/sinumerik/hmi/cfg
"slamconfig.ini" file
In the "slamconfig.ini" configuration file, for every operating area, you can create a section
that was configured in the "systemconfiguration.ini" file. The section must bear the
configured name of the appropriate operating area, e.g. AreaOEM.
Value
TextId
TextContext
TextFile
Graphic
SoftkeyPosition
AccessLevel
Example
The softkey for the "AreaOEM" operating area with the following properties is configured in
the following example:
● The softkey displays the text which has been stored in the "mytext_<lng>.ts" text file
under the context "mycontext" with the "MY_AREA" TextID.
● The "mypicture.png" icon is displayed on the softkey.
● The softkey is located at position 7 in the operating area menu.
● The softkey with access level 5 (keyswitch position 2) is displayed.
[AreaOEM]
; Text-ID of a language dependent text
TextId = MY_AREA
; File name of the text file which contains the Text-ID
TextFile = mytext
; Context in the text file to which the Text-ID is assigned to
TextContext = mycontext
; File name of an icon shown on the area softkey
588
Meaning
Text ID for a foreign-language text which will be displayed as the softkey label.
Context of the foreign-language text.
Name of the text file which includes the context and the foreign-language text.
Name of an image file which will be used as an icon for the softkey.
Fixed softkey position of the area softkey. In this case, softkey positions 1 to 8
are located on the 1st horizontal bar and softkey positions 9 to 16 on the 2nd
horizontal bar, etc.
Access level from which the softkey will be displayed. If this value is not
specified, the access level 7 (keyswitch position 0) is set.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)