5.15
ENTRY variable
Description
The ENTRY variable can be used to check by what method a dialog has been called.
Programming
Syntax:
Description:
Return Value:
Example
IF ENTRY == 0
DLGL("The dialog was not called during programming")
ELSE
DLGL("The dialog was called during programming")
ENDIF
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
ENTRY
The ENTRY variable is a read only variable.
The result of the scan can be:
0 = No programming support
1 = Programming support (the dialog was called by programming support)
2 = Programming support + default setting from the previous dialog (sub-
dialog)
3 = Programming support + recompilation
4 = Programming support + recompilation with generated comments, with
# sign
5 = Programming support + recompilation with generated comments,
without # sign
Variables
5.15 ENTRY variable
69