Siemens SINUMERIK 840D sl Commissioning Manual page 229

Entry <relation>
EQUAL
NOT
LOWER
HIGHER
Entry <value>
Numbers
Character strings
Cancel criteria
Cancel
criterion
(ClearInfo)
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Description
Equal to
Not equal to
Less than
Greater than
Description
-
-
Alarm source
(Source)
0 /HMI
1 /NCK
2
3
4
5
6
7
8 /PLC
9
10
11
12
13
14 /NCK
15 /NCK
Description
Alarms that are canceled by the HMI.
Alarms that are canceled by power-on of the NCU.
Conditions are canceled by a hardware reset of the NCU.
Conditions are deleted by a "CANCEL" command to the NCU.
Conditions are canceled by the NCK itself.
Conditions are canceled by an "NC Start" command on the NCU.
Conditions are canceled by a reset of the mode group (BAG).
Conditions are canceled by an "NC Reset" command on the
NCU.
PLC messages of the FB15 (basic program).
PLC alarms of the FB15 (basic program).
Dialog alarms of the HMI that are canceled by the "Recall" key [^].
Reserved
S7-PDiag, S7-Graph, S7-HiGraph or other Alarm_S(Q) alarms of
the PLC (SFC17/18) with alarm state "not acknowledged"
S7-PDiag, S7-Graph, S7-HiGraph or other Alarm_S(Q) alarms of
the PLC (SFC17/18) with alarm state "acknowledged".
Drive alarms via NCK.
Part program messages.
Configuring alarms
13.3 Configuring an alarm log
223