Siemens SINUMERIK 840D sl Commissioning Manual page 157

Identifier
MultiToolInMag
MultiToolInPlace
MultiToolInMagInPlace
MultiToolMyMag
MultiToolMyPlace
MultiToolPlaceSpec
MultiToolPlaceSpecIdent
MultiToolSizeLeft
MultiToolSizeRight
MultiToolSizeUpper
MultiToolSizeDown
MultiToolOverSize
MultiToolPosition
MultiToolProtAreaFile
MultiToolKindOfDist
MultiToolKindOfDistRO
MultiToolDistAngle
MultiToolState
MultiToolStateEnabled
MultiToolStateLocked
MultiToolStateLockedRO
MultiToolStateInChange
MultiToolStateFixed
MultiToolStateUsed
MultiToolStateAutoReturn
MultiToolStateIgnoreLocked
MultiToolStateMarkedToUnload
MultiToolStateMarkedToLoad
MultiToolStatePermanent
MultiToolState1To1Exchange
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Parameter or property
Magazine in which the multitool is located
Magazine location containing the multitool
Magazine number/Magazine location
Owner magazine of the multitool
Owner magazine location of the multitool
Location type
Location type as text
Multitool size to the left in half locations
Multitool size to the right in half locations
Multitool size to the top in half locations
Multitool size to the bottom in half
locations
Multitool size as fixed setting - two half
locations left, two half locations right, one
half location top, one half location bottom
Multitool position
File name of the multitool description
which is required to determine the
protection zone
Type of distance input of the multitool
locations
Type of distance input of the multitool
locations, only read access
Type of distance input of the multitool
locations as an angle
Multitool status in the hexadecimal
notation
Multitool status - multitool released
Multitool status - multitool locked
Multitool status - multitool locked, only
read access
Multitool status - multitool is being
changed
Multitool status - multitool fixed location
coded
Multitool status - multitool was in use
Multitool status - automatic return
Multitool status - do not observe locked
status
Multitool status - multitool is selected to be
unloaded
Multitool status - multitool is selected to be
loaded
Multitool status - multitool is a master tool
Multitool status - one to one replacement
Tool management
12.2 Configuring the user interface
System variable
$A_TOOLMN
$A_TOOLMLN
$A_TOOLMN /
$A_TOOLMLN
$A_MYMN
$A_MYMLN
$TC_MTP7
$TC_MTP7
$TC_MTP3
$TC_MTP4
$TC_MTP5
$TC_MTP6
$TC_MTP3 -
$TC_MTP6
$TC_MTP_POS
$TC_MTP_PROTA
$TC_MTP_KD
$TC_MTP_KD
$TC_MTP_KD
$TC_MTP8
$TC_MTP8, Bit1
$TC_MTP8, Bit2
$TC_MTP8, Bit2
$TC_MTP8, Bit5
$TC_MTP8, Bit6
$TC_MTP8, Bit7
$TC_MTP8, Bit8
$TC_MTP8, Bit9
$TC_MTP8, Bit10
$TC_MTP8, Bit11
$TC_MTP8, Bit12
$TC_MTP8, Bit14
*)
151