Siemens SINUMERIK 840D sl Commissioning Manual page 433

Saving help files in the target system
Procedure:
1. Copy the configuration file "prog.ini" to the following directory:
2. Copy the file "
3. Create a directory for the desired language of the online help under the following
4. Copy the language-dependent
5. Copy the html files with the description of the OEM cycles to the following directory:
The settings become effective only after restarting the system.
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
/oem/sinumerik/hmi/cfg
slhlp.xml
/oem/sinumerik/hmi/cfg
path:
/oem/sinumerik/hmi/hlp/<lng>
Use the specified language code from the list of language codes for file names. The
directory names must be written in lower case.
following path:
/oem/sinumerik/hmi/<lng>/prog_help_<lng>.ts
/oem/sinumerik/him/hlp/<lng>/hmi_prog_help/cycle<n>_help.html
19.8 Example: This is how you create a programming online help
" to the help book in the following directory:
and copy the
prog_help_<lng>.ts
OEM-specific online help
file there
hmi_prog_help.xml
file for the Product Brief to the
427