2.3.4
Section [SNMP]
Description
Character strings delivered via SNMP (Simple Network Management Protocol) are entered
here. This is a way of giving out information.
SNMPLocation
This string is used for the standard OID SNMPv2-MIB::sysLocation. It is possible to specify a
location here, which can be subsequently called with an SNMP client.
Value:
Default:
SNMPContact
This string is used for the standard OID SNMPv2-MIB::sysContact. It is possible to specify a
contact address here, which can be subsequently called with an SNMP client.
Value:
Default:
SNMPAutLocation
This string is used for the Siemens-specific OID
automationSystemIdent.automationLocationTag. It is possible to specify an additional
location here, which can be subsequently called with an SNMP client. This is similar to
SNMPLocation in terms of the MIB description, although it is intended for entries relating to
automation.
Value:
Default:
SNMPFunction
This string is used for the Siemens-specific OID
automationSystemIdent.automationFunctionTag. It is possible to specify a function
designation here, which can be subsequently called with an SNMP client.
Value:
Default:
NCU operating system (IM7)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Any character string
Empty
Any character string
Empty
Any character string
Empty
Any character string
Empty
Configuring the system
2.3 Configuration file "basesys.ini"
23