Siemens SINUMERIK 840D sl Commissioning Manual page 175

Example
<MAGAZINEPLACENAMECONFIGURATION>
</MAGAZINEPLACENAMECONFIGURATION>
Name for a magazine
Dedicated texts can also be allocated for magazines. The text or the text identifier is entered
into the magazine configuration file (ini file) of the NC. The system variable for the magazine
name is $TC_MAP2[magNo]. The magazine name is displayed at the top right in the tool
lists.
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
<MAGAZINE_9998>
<PLACE_2>
<Name value="TM_SPECIAL_MAG_PLACE_1" type="QString" />
</PLACE_2>
</MAGAZINE_9998>
<MAGAZINE_1>
<PLACE_3>
<Name value="TM_SPECIAL_MAG_PLACE_2" type="QString" />
</PLACE_3>
</MAGAZINE_1>
Tool management
12.2 Configuring the user interface
169