Siemens SINUMERIK 840D sl Commissioning Manual page 522

Configuring cycles
22.6 Swiveling
Side view of the machine
from the X direction
Spindle (tool adapter) is
positioned on a block
dimension above the top
edge of the table (rotary axis
C) or the center of the table.
A measuring rod in the
spindle is used to determine
the turning center of rotary
axis C.
Side view of the
machine from the
Y direction
516
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)