Siemens SINUMERIK 840D sl Commissioning Manual page 815

InternalIP
Use this variable to set the fixed IP address in the system network. InternalIP should always
be used together with InternalNetMask.
Value:
Default:
InternalNetMask
Specifies the subnet mask for InternallP and should always be used together with it.
Value:
Default:
InternalIP_Alias
Use this variable to define an additional alias IP address for the interface of the system
network (X120); this is practical in certain application cases.
Value:
Default:
InternalIP_Alias should always be used together with InternalNetMask_Alias.
InternalNetMask_Alias
This variable specifies the subnet mask for InternallP_Alias and should always be used
together with it.
Value:
Default:
EnableDHCPD_SysNet
If this variable is set to zero, then the start of the DHCP server on the system network X120
is prevented.
Value:
Default:
NCU operating system (IM7)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
IP address
192.168.214.1
Subnet mask
255.255.255.0
IP address
Empty
Subnet mask
Empty
Empty, 0 or 1
Empty
Configuring the system
2.3 Configuration file "basesys.ini"
19