Siemens SINUMERIK 840D sl Commissioning Manual page 257

Element values
Parameter
Name
Color
Detail level
PLC bit
Activation
TO unit
Magazine
Location
See also
Creating protection areas (Page 249)
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Meaning
Designation, which is displayed in the tree structure.
Selection of the color
Defines from which detail level the protection area or the protection
area elements are displayed on the user interface.
Lowest detail level: 0
•
Highest detail level: 3
•
Only for pre-activation
- 1
•
Not activated
0 - 63
•
Activation of the collision avoidance is controlled using the bit
entered here.
The maximum number of PLC bits depends on MD18897. It can
be a maximum of 64.
Activates the collision avoidance for the protection area.
•
Deactivated
•
Deactivates the collision avoidance for the protection area.
Preactivated
•
Activation of the collision avoidance is controlled using the bit
entered into the "PLC bit".
Specifies the TO area in which the magazine and tool data are saved.
When magazine management is active:
Specifies the magazine number in which the tool or magazine location
is located (e.g. for spindle 9998).
Without magazine management: 1
•
For revolvers: Number of the magazine location
•
Collision avoidance
14.7 Creating a kinematic structure
251