Siemens SINUMERIK 840D sl Commissioning Manual page 550

Configuring cycles
22.8 Measuring cycles and functions
MD51753 $MNS_J_MEA_M_DIST_TOOL_RADIUS
= 1
MD51786 $MNS_J_MEA_T_PROBE_MEASURE_DIST
= 10
General cycle setting data when measuring with rotating spindle
SD54670 $SNS_MEA_CM_MAX_PERI_SPEED[0]
= 100
SD54671 $SNS_MEA_CM_MAX_REVOLUTIONS[0]
= 1000
SD54672 $SNS_MEA_CM_MAX_FEEDRATE[0]
= 20
SD54673 SNS_MEA_CM_MIN_FEEDRATE[0]
= 1
544
Default value
Default value
Default value
Default value
Default value
Default value
Measuring path to measure the tool
radius.
Measuring path to calibrate the probe
or for measurements with stationary
spindle.
Maximum permissible peripheral
speed of the tool to be measured.
Maximum permissible tool speed of
the tool to be measured. The speed is
automatically reduced when
exceeded.
Maximum permissible feedrate to
probe the tool to be measured at the
probe.
Minimum feedrate for the first probing
of the tool to be measured at the
probe. The avoids excessively small
feedrates for large tool radii.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)