Siemens SINUMERIK 840D sl Commissioning Manual page 1023

Configuration of the system
3.1 Overview
Once you have completed initial commissioning, you can adapt the configuration of the
system:
● For security reasons, set up user accounts with limited rights, e.g. for auto logon mode.
● You can view (Page 9) or change (Page 22) the name of the PCU 50.5.
● The network settings in the delivery condition have been adapted for use with
● You can deactivate the USB interfaces (Page 24) to prevent malicious software from
● You can set up an external screen (Page 25) or set the screen resolution (Page 26).
● If you use a SITOP UPS module for the uninterruptible power supply or plan to use one,
Other configuration options (e.g. Desktop background) are available directly from the service
desktop can be implemented by the known Windows 7 methods:
● To call up the Windows help, in the Start menu click on "Help and Support."
● You will find help for Windows 7 in the Internet on the Microsoft website: Microsoft
PCU Base Software (IM10)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK solution line and usually do not have to be changed.
entering the system network via this route.
configure it for use with the PCU Base Software (Page 29).
Windows support (http://windows.microsoft.com/en-US/windows/windows-
help#windows=windows-7)
3
21