Commissioning the system
1.2 User administration
1.2.2
User settings
"Global Settings"
In the ServiceCenter Users, as HMI service user, you set parameters under "Global
Settings" for the system behavior:
● When the PCU is booting up
● When the HMI program is starting
● With reference to the desktop
Note
The following diagrams show, as an example, an application with the
SINUMERIK Operate software installed.
Using ServiceCenter Users
Buttons:
● Use "Exit" to quit ServiceCenter Users.
● If you press the "Reboot" button, the system immediately reboots (without prior
12
prompting).
Commissioning Manual, 02/2012, 6FC5397-1DP40-3BA0
PCU-Basesoftware (IM8)