Siemens SINUMERIK 840D sl Commissioning Manual page 289

Precondition
In order to save NC data, you require the access level 2 (service).
To back up programs/workpieces, you need access level 6 (keyswitch position 1).
Data of the control components
Control components
NC data
PLC data
HMI data, all
HMI data, selection:
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
With compensation
data
with compile cycles
Cycle storage
Texts
Templates
Applications
Configurations
Configuration
Help
15.4 Creating an archive with original data
Data
Machine data
Setting data
Option data
Global (GUD) and local (LUD) user data
Tool and magazine data
Protection zone data
R parameters
Zero offsets
Compensation data
Workpieces, global part programs and subprograms
Standard and user cycles
Definitions and macros
QEC - quadrant error compensation
•
CEC - operation/angularity compensation
•
EEC - leadscrew pitch / encoder error compensation
•
It only makes sense to archive machine-specific compensation
•
data if the series start-up file is reloaded into the same
controller.
Compile cycles (*.elf) are displayed, if compile cycles are
available.
OB (organization blocks)
FB (function blocks)
SFB (system function blocks)
FC (functions)
SFC (system functions)
DB (data blocks)
SDB (system data blocks)
Definitions and cycles
User texts, alarm texts
Individual templates, workpiece templates
HMI applications, OEM applications
Configurations
Configuration, incl. display machine data
Help files
Data backup
283