Siemens SINUMERIK 840D sl Commissioning Manual page 914

Commissioning the system
1.2 User administration
Adding new users from a domain
If the PCU is a member of a domain, users already existing in this domain can be added as
HMI users or HMI+Service users:
1. Click on the "New User" button.
2. To do this, select the corresponding entry in the "Domain" list and a user from the "Name"
3. Assign a user type and a user group to the user.
See also
How to add the PCU to a domain (Page 43)
1.2.4 This is how you administer users
Overview
As an HMI+Service user, you can execute the following tasks in the Users ServiceCenter:
● Change user names.
● Delete users.
Change the user name
1. Left or right-click the user who you wish to rename in the list.
2. To change the user name, select "Rename" from the pop-up menu.
3. Enter a new name and confirm with OK.
Deleting a user
To delete a user again, follow these steps:
1. Left or right-click the user who you wish to delete in the list.
2. To delete the user, select "Delete" from the short-cut menu using righthand mouse key.
Result: The user is deleted after confirming the confirmation prompt.
20
list.
The Windows user group is only active locally on the PCU.
Commissioning Manual, 02/2012, 6FC5397-1DP40-3BA0
PCU-Basesoftware (IM8)