Configuring the system
2.3 Configuration file "basesys.ini"
SNMPStation
This string is used for the SINUMERIK -specific OID
mcSinumerikMIB.mcSinumerikMiscStation. The value is the name of a station to which the
device belongs. Devices with the same station name are therefore identified as being
contiguous.
Value:
Default:
See also
Example: Configuration file 'basesys.ini' (Page 29)
2.3.5
Section [DCP]
Description
The parameters in this section define the properties of the DCP protocol (Discovery and
Basic Configuration Protocol) e.g. that are used in the menu item "Accessible participants" of
STEP 7 is used.
InternalDcpEnabled
This can be used to switch-on and switch-off the DCP in the system network (X120); for the
NCU, the value is also used for X127.
Value:
Default:
ExternalDcpEnabled
This can be used to switch-on and switch-off the DCP in the company network (X130).
Value:
Default:
24
Any character string
Empty
0 or 1
1
0 or 1
0
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
NCU operating system (IM7)