Siemens SINUMERIK 840D sl Commissioning Manual page 873

Scenario : Start Command Shell under Linux
I
Procedure:
1. Connect the service system to the USB interface X125 or X135 of the NCU.
2. In the main menu, select the menu item "Service Shell".
3. Log on as a service technician using the user name "manufact" and password
4. Use the command "sc connect" to connect the network drive:
5. Using the command "sc save", create the backup file "backup01".
Scenario : Start the command shell with WinSCP on the programming device:
II
Procedure:
1. Start WinSCP and enter the following data in the log-on window:
2. Select in the menu "Commands" → "Open Terminal".
3. Execute the data backup using the commands described in steps 4 to 6 from scenario
Scenario : Start the command shell using the VNC Viewer on the programming device
II
Procedure:
1. Start the VNC Viewer and connect to the NCU using the IP address (or where relevant,
2. Log on under the "manufact" user name with the password "SUNRISE".
3. To restore the data, enter the corresponding commands as described under steps 3 to 5
NCU operating system (IM7)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
"SUNRISE".
sc connect //username%password@server/share /tmp/backup
Please enter here the user name and the password for the network drive that is to be
connected to.
Choose –full, to backup all data on the CompactFlash Card, or –user, if you only want to
backup user data in the directory /user.
Example:
sc save –full /tmp/backup/backup01
Result:
A backup file of the complete CompactFlash Card is created under the specified path on
the network drive.
– IP address of the NCU (or, if required, host name)
– User name "manufact" with password "SUNRISE".
using the host name)
in scenario .
I
Service and diagnostics
3.4 Backing up data via the service shell
.
I
77