Programming commands
6.3 Functions
6.3.16
Load Block (LB)
Description
The LB (Load Block) function can be used to load blocks containing subprograms during
runtime. LB should be configured in a LOAD method so that the loaded subprograms can be
called at any time.
Note
Subprograms can also be defined directly in a dialog so that they do not have to be loaded.
Programming
Syntax:
Description:
Parameters:
Example
LOAD
LB("PROG1")
LB("PROG2","XY.COM")
END_LOAD
110
("Block name"[,"File"])
LB
Loads subprogram during runtime
Block name
Name of block identifier
File
Path name of configuration file
Default setting = Current configuration file
; Block "PROG1" is searched for in the current
configuration file and then loaded.
; Block "PROG2" is searched for in the configuration file
XY.COM and then loaded.
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1