Tool management
12.2 Configuring the user interface
Entries
ActiveCompensationsEnabled
M2NLockEnabled
AccessLevelWriteDetailsAllParameter
AccessLevelReadDetailsAllParameter
FixNumberOfMultiToolPlaces
FixKindOfDistInMultiTools
DlDisplayMode
CombinedToolMonitoring
136
Meaning
The "Working offsets" function is enabled. This function
depends on the machine configuration. Unique D
number, magazine location adapter and magazine
management must be set.
False - default setting, the "Working offsets" function is
not enabled.
Locking of an M to N switchover while a function of the
tool management is being executed.
True - default setting, switchover is locked.
The following entry specifies the access level as of
which write access applies in the "Details - All
Parameters" window.
Default setting: Access level 7 (keyswitch position 0) -
can be overlaid through the setting in MD51215.
The following entry specifies the access level as of
which the "Further details" function is offered in the
"Details" dialog.
Default setting: Access level 7 (keyswitch position 0) -
can be overlaid through the setting in MD51198.
Multitools are created with a fixed number of multitool
locations. There is no prompt when you create the
multitool.
Multitools are created with a fixed type of clearance input
of the multitool locations. There is no prompt when you
create the multitool.
Possible input value: 3 - clearance of the multitool
locations as an angle.
DisplayDistributed - default setting, the setup offsets
•
EC are displayed in the tool list and the additive
offsets SC are displayed in the tool wear list.
EcInWearList - the setup offsets EC are displayed in
•
the tool wear list and the additive offsets SC are not
displayed.
Specifies the combined monitoring types offered in the
toggle field:
Time/Count - tool life and workpiece count
•
Time/Wear - tool life and wear monitoring
•
Count/Wear - workpiece count and wear monitoring
•
Time/Count/Wear - tool life, workpiece count and
•
wear monitoring
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)