Siemens SINUMERIK 840D sl Commissioning Manual page 712

Programming commands
6.3 Functions
6.3.5 Delete Program file function (DP)
Description
The DP (Delete Program) function deletes a file from the passive HMI or active NC file
system.
Programming
Syntax:
Description:
Parameters:
Example
The following data management syntax is used for this function:
• with return value
• Without return value:
DP("\MPF.DIR\CFI.MPF")
94
("File
DP
Delete file
File
DP("//NC/MPF.DIR/XYZ.DIR ", VAR1)
VAR1 = 0 File was deleted.
VAR1 = 1 File was not deleted.
DP("//NC/MPF.DIR/XYZ.DIR ")
")
Complete path name of file to be deleted
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Integrate Run MyScreens (BE2)