Siemens SINUMERIK 840D sl Commissioning Manual page 1077

Procedure
To configure the IP routing in the Service Center, proceed as follows:
1. In the main menu of the Service Centers, click "Network."
2. In the "Network settings" dialog box, go to the "IP Routing" tab.
3. Configure the necessary routes. See also: Network settings in the Service Center
Result
The routing has been configured and the PG/PC and PCU are connected via the NCU.
Now, perform the desired steps, for example, Restoring a disk image (Page 68).
PCU Base Software (IM10)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Figure 5-10 Service Center - IP routing
(Page 60)
Backing up and restoring data
5.10 Operating a service PC/PC in the network
75