Siemens SINUMERIK 840D sl Commissioning Manual page 717

//M(TestGC/"Code generation:")
PRESS(HS8)
MP("CF_CARD:/MPF.DIR/MESSEN.MPF","//NC/MPF.DIR")
SP("\MPF.DIR\MESSEN.MPF")
END_PRESS
6.3.9 Dialog line (DLGL)
Description
It is possible to configure short texts (messages or input tips) for output in the dialog line of
the dialog in response to certain situations.
Possible number of characters in the default font size: approx. 50
Programming
Syntax:
Description:
Parameters:
Example
IF Var1 > Var2
DLGL("Value too large!")
ENDIF
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
; Load file into NC
; Select file
("String
DLGL ")
Outputs text in the dialog line
String Text, which is displayed in the dialog line
; The text "Value too large!" appears in the dialog
line if variable1 > variable2.
Programming commands
6.3 Functions
99