Siemens SINUMERIK 840D sl Commissioning Manual page 345

Procedure
Note
Deleting logbook entries
Up to the end of the 2nd commissioning, you have the option to delete the logbook entries
up to the time of the first commissioning using the "Clean up" softkey.
Searching for a logbook entry
You have the option for searching for specific entries using the search function.
Additional search option
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
1. The logbook is opened.
2. Press the "New entry" softkey.
The "New logbook entry" window opens.
3. Enter the required data and press the "OK" softkey.
You return to the "Machine logbook" window and the entry is displayed
below the machine identity data.
1. The "Machine logbook" window is opened.
2. Press the "Search..." softkey and enter the desired term in the search
form. You can make a search according to date/time, company
name/department or according to fault diagnostics/measure.
The cursor is positioned on the first entry that corresponds to the search
term.
3. Press the "Continue search" softkey if the entry found is not the one that
you are looking for.
Press the "Go to Beginning" softkey to start the search at the latest
entry.
Press the "Go to End" softkey to start the search at the oldest entry.
Service and diagnostics
18.8 Action log
339