Siemens SINUMERIK 840D sl Commissioning Manual page 336

Service and diagnostics
18.6 Machine identity
Procedure
Entering dealer data
You can acquire the address data of any number of dealers in file "dealer.xml". If you wish to
enter additional dealers, for each dealer, copy the area <Dealer> to <Dealer>.
<?xml version="1.0" encoding="utf-8" ?>
<Addresses>
</Addresses>
You can list the address data of any number of manufacturers in the "oem.xml" file. If you
wish to enter additional manufacturers (OEMS), for each dealer, copy the area
<Manufacturer> to </Manufacturer>.
330
1. Select the "Startup" operating area.
2. Press the "System data" softkey.
3. Copy the files from the folder
/HMI-data/templates/examples/machine identity to a data carrier.
4. Copy the files to your PC to edit them.
5. After processing, copy the data to a data storage medium so that these
can then be transferred to the control system.
6. Insert the copies into the folder
HMI-data/Templates/Manufacturer/Machine identity or use the "Import
data" softkey.
The addresses or machine types are displayed in drop-down list boxes.
When you select a list, the data stored for that address is automatically
entered in the input fields.
<Dealer>
<Customer-Id></Customer-Id>
<Name></Name>
<Street></Street>
<ZIP code></ZIP code>
<Location></Location>
<Country></Country>
<State></State>
<Contact></Contact>
<Phone></Phone>
<Fax></Fax>
<E-mail></E-mail>
<URL></URL>
</Dealer>
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)