Siemens SINUMERIK 840D sl Commissioning Manual page 605

Procedure
1. You can copy the sample file " oem_slck_deu.ts" from the following directory:
2. Store or create the file in the /oem/sinumerik/hmi/lng or
3. Give the file a name, e.g. for German texts: "slck_deu.ts".
4. Open the file and in the <message> and </message> area, define the key labeling.
5. Restart the HMI.
Example of a key label
<!DOCTYPE TS><TS>
<context>
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
/siemens/sinumerik/hmi/template/lng.
/user/sinumerik/hmi/lng directory.
If you wish to create the key labeling for additional languages, then a separate file must
be created for each language. Save the file with the appropriate language code in the file
name. To do this, use the language codes specified above.
In order that the key labeling is displayed during the program runtime, the file must be
converted into a binary format. This conversion is only executed when the HMI powers
up.
<name>SlCkDialog</name
<message>
<source>SK_USERKEY1</source>
<comment></comment>
<translation>U1</translation>
<remark>User key 1</remark>
<chars>10</chars>
<lines>2</lines>
<languageIndependent>true</languageIndependent>
</message>
<message>
<source>SK_USERKEY2</source>
<comment></comment>
<translation>U2</translation>
25.2 Configuring user-specific key labeling
HT 8
599