Configuring cycles
22.1 Activating turning/milling/drilling technologies
Setting the coordinate system
MD52000 $MCS_DISP_COORDINATE_SYSTEM
= 0
With this machine data you adapt the position of the coordinate system to the machine. This change
also automatically influences the following settings:
•
•
•
•
The following settings can be selected for the coordinate system:
452
Default setting
Help screens
Sequence graphics
Simulation
Input fields with circle direction data
Position of the coordinate system
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)