Siemens SINUMERIK 840D sl Commissioning Manual page 181

If you require the texts in additional languages, then you must create a separate file for each
language. The names of the files only differ by the language code "xxx" (Supported
languages (Page 584)). Use only the specified language codes.
File "slstepforms_xxx.ts "
Tag
source
translation
chars
lines
remark
Procedure
1. You can copy the sample file "oem_slstepforms_deu.ts" from the following directory:
2. Save or create the file in the /oem/sinumerik/hmi/lng or /user/sinumerik/hmi/lng directory.
3. Change the file name to "slstepforms_deu.ts".
4. Open the file and define the texts in the <message> and </message> areas.
5. Restart the system.
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Meaning
Text identifier for label: SlStepLabels
A maximum of up to four M functions can be defined:
T_LAB_USER_MACHINE_FUNC_1
T_LAB_USER_MACHINE_FUNC_2
T_LAB_USER_MACHINE_FUNC_3
T_LAB_USER_MACHINE_FUNC_4
Text identifier for tooltip: SlStepToolTip
There are 3 tooltips for every machine function x (1 - 4):
T_TT_USER_MACHINE_FUNC_x: Standard tooltip if the machine function was not
selected.
T_TT_USER_MACHINE_FUNC_x _ON: Tooltip when the machine function is
activated
T_TT_USER_MACHINE_FUNC_x_OFF: Tooltip for deactivated machine function
Text, which is displayed at the user interface.
Label texts: You can only enter texts on one line. The "lines" entry is not applicable.
Tooltip: You can enter multi-line texts. A line break is set using the "%n" character.
Text length
The maximum text length is 30 characters.
Number of lines
The maximum number of lines is three.
Own comment - entry is not displayed at the user interface.
/siemens/sinumerik/hmi/template/lng
If you require texts for additional languages, then a separate file must be created for each
language. Save the file with the appropriate language code in the file name.
The file must still be converted into a binary format in order that the texts are displayed
during the program runtime. This data is only converted during power up.
Tool management
12.2 Configuring the user interface
175