Siemens SINUMERIK 840D sl Commissioning Manual page 980

Backing up and restoring data
4.2 Operating the service PC or the PG on the network
Releasing directory for network access (Windows XP)
1. Create a directory on a local drive; e.g. D:\PCU_Backup
2. Using the right mouse key, open the "Properties" dialogue box of the directory and the
3. Select "Share this folder". As a share name (release name), the directory name is used,
Note
Ensure there is sufficient free memory on the hard disk of the PG/PC to be able to save
the ghost image when creating a back-up.
86
"Sharing" tab.
e.g. PCU_Backup.
If the directory name is changed, the new name must be specified when connecting the
drive!
Commissioning Manual, 02/2012, 6FC5397-1DP40-3BA0
PCU-Basesoftware (IM8)