Siemens SINUMERIK 840D sl Commissioning Manual page 1025

3.4 Setting the IP address and domain
The network settings in the delivery condition have been adapted for use with SINUMERIK
solution line and usually do not have to be changed.
See also: Network settings (Page 9)
If you want to distinguish your network configuration from the factory settings, you can adapt
them in the Windows Control Panel.
You will find these settings in the following menu:
● "Start > Control Panel > Network and Sharing Center > View network connections"
Further information
You will find information about network settings under Windows 7 in the Windows help.
● To call up the Windows help, in the Start menu click on "Help and Support."
● You will find help for Windows 7 in the Internet on the Microsoft website: Microsoft
PCU Base Software (IM10)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Windows support (http://windows.microsoft.com/en-US/windows/windows-
help#windows=windows-7)
Configuration of the system
3.4 Setting the IP address and domain
23